Javascript n'est pas activé !
Vous devez l'activer pour passer commande.
ACCESSORIES
Pompons, cockades...
-
Shako plate: chasseur à cheval of line, line light infantry or legions of garde nationale, 1816-1810
Silverplated copper.
100 X 115 mm. Only one on stock.
-
Plate for shakos 1806 - 1810 type for officer of 102 th of line
Heigth 12 cm, width 1 cm.
Different types of plates existed in this regiment during same period.
-
Shako plate for fusilier de la garde impériale, end of Empire
Very nice quality of stamp, only one for sale, old reproduction
120 X 135 mm.70,00 €
Out of stock
-
Shako plate restoration
140 X 115 mm .Only one on stock. Copy
-
2 plates: garde chiourme and 4 reg de chasseur.
Plaque tapées dans 2 clinquant, une tôle très fine, pour le cinéma.
11 X 11 cm et 9 x 9 cm.
Pas génial comme qualité, mais à peu près introuvable en authentique
-
Bearskin plate for swiss guard, royalty
Copy made for movie, some decades ago.
Only one for sale
210 X 160 mm55,00 €
Out of stock
-
Shako plate, 100 th infantry, 1806 -1810
Rare copy made by galvanoplastie.
100 X 130 mm
Just one for sale
-
Plate for shakos 1806 type
Heigth 12 cm, width 1 cm.
Used as well for line infantry as for hussars with "yellow" buttons
-
Pompon for fatigue cap of sergent de grenadier or and red
Total length : 75 mm, fringes 55 mm, approx +/- 5 mm
-
Visor for shako 1st Empire/restoration
Thick leather 4,3 mm, adorned with stamped hearts and usual lines on top side.
-
Cockade for troop, thick made in India
Size 70 mm, 5 mm thick, hand painted.
Thick and hard to bend. Discounted, no possible return.
Think about our warning before you pass your order
-
Bocettes with grenade, sheet metal, no fixation on back, sold by pair
For shakos of regiments with "white" buttons .
Diametre 40 mm, nice old french production
-
Top for shako Empire/Restoration
Diametre 25 cm, vertical part 3 cm.
Good black leather.
To make your shakos by yourself.
-
Aérateurs pour casquettes/shakos, price by one
Very useful to finish some hats.
Small size 9,6 mm. Sometimes a bit oxydized, it is not new.
Sold as it is
-
Shako plate for Imperial custom.
Very rare plate
Nr 7 corresponds to Anvers.
Heigth 15 cm, large max 12 cm.
Silverplated.
-
Empire - Tissu chapeaux troupe - Cocarde - Fab. asie
Nous vendons dorénavant ce modèle de cocarde pour les chapeaux troupe Empire.
La centre est cousu avec du fils blanc, nous vous laissons mettre un peu de fils bleu par dessus ou rien si vous mettez un bouton.
-
Cord for shako, trooper - Off white
Can be dyed, by yourself, in other colours.
"Raquette" diametre: 70 mm
-
Bocettes with grenade...cheap. Price by pair!
Non regulation type for empire period. Very limited stock.
Diam 42 mm
-
Chinscales for troop- by pair
15 scales from 35 mm to 20 mm large, stapled on leather.
You have to make a hole in biggest scale to pass bocettes (not included in price, choose the type)
Price by pair. 19 cm long(black cotton braid not included)
-
Chinscales and bocettes for dragoon or cuirassier helmet, 1st Empire
Only 1 pair on sale.
Brass110,00 €
Out of stock
-
Display for helmets and hats
Quite interesting to present your helmets and hats.
Red vernished wood.
Height: 36 cm, base diametre: 19,5 cm. Top Diametre: 9,5 cm
-
Cord for bearskin, troop
Different colours are possible.
Set includes pompon on front.
"Raquette" size: 120 x 60 mm
-
Bear hat brass plate, imperial guard
PRECEDENT PRICE: 47 €
Regulation type.
Nice in a collection! Most famous symbol of "grognards", the infantry of imperial guard.
Stamped brass 21 X 16 cm.
-
Shako underlined plate, 1812 regulation type, with grenade, made in Asia
Brass, made in Asia.Used (for instance) by infantry from 1812.
Dimensions:
high: 13 cm
Large: 12 cm
We send them without any cleaning, they are sometimes not clean as new plates....you will consider if it is necessary to clean them or not!
-
Officer's chinscales for shakos- gold or silver, price by pair
Type of chinscales used to equip officers shakos.
Exist in 2 colours: silver or goldplated. 215 mm
You have to make holes to pass bocettes...sold as they are
-
Shako brass plate, regulation 1806 -1810, white metal
11 cm high, 10 cm large.
Fits as well for infantry or hussar.
Surface is not perfect, reduced price
-
Shako plate for marin de la garde - The unit
Plate described in book of C Blondiau(Aigles et shakos du premier Empire, Hors série No 4 d'Uniformes, Les armées de l'histoire), page 34. Size 10,5 X 9 cm. Brass. Exclusive production for Antikcostume.
29,00 €
Out of stock
-
Cord for bearskin, officer
Different colours are possible: silver, gold and red, gold
Set includes pompon on front, 1 "raquette" for grenadier à cheval, 2 for grenadier à pied.
Thin fringes for lieutenant or captain, bullions for chef de bataillon or colonel...we can add stars, contact us, for generals.
-
Plates for officer, with 8, 1810 regulation type, dull aspect
12 X 12 cm, stamped brass.
We receive them with a dull aspect, after cleaning it has a shiny brass aspect.32,00 €
Out of stock
-
Plates for troop with 8, 1810 regulation type.
12 X 12 cm, stamped brass
-
Artillry on foot: 1806 1810
Stamped brass: 11cm high, 10 cm large.
Some very small bubbles in brass on borders, not very important.
Sold as they are.
-
Shako eagle for foot artillery of imperial guard
Stamped brass eagle. 2 fixations on back
Dimensions 11,5 X 8 cm
25,00 €
Out of stock
-
Eagle, young guard. Head looking to right
Stamped brass eagle. Dimensions 10,5 X 8 cm.
Suitable for sabretache of "chasseur a cheval de la garde", ammunition pouch and shako of young guard.
MADE IN ASIA.
-
Shako plate of "douanes imperiales"
Regulation type 1812 plate, stamped "DOUANES IMPERIALES".
One original plate like this one was sold by B. Malvaux in 2009.27,00 €
Unavailable
-
Shako underlined plate, 1812 regulation, not cut out, 3 types: lion, grenade, horn
Plate made from the original mould !
Available with grenades on the sides, horns, or lion(only one on stock and oxydized).
Plate is delivered stamped in its brass sheet, all you have to do is cut it out.
-
Shako underlined plate, 1812 regulation, grenade, lion or horn
Plate made in BRASS from the original mould
3 DIFFERENT TYPES: grenade, lion, horn.
All made in France except white metal or silverplated types...when on stock.
-
Gendarmerie Impériale shako plate
Copper asbestos production, silverplated.
Interesting way to copy rare plates in short series.
Sold as it is, not perfect, but barely impossible to find as original.
12 x 12 cm
PRECEDENT PRICE: 92 €
-
Austrian eagle for bearskin
Big plate, 18 X 15, sold uncut. One cut to shape on stock. If you need many cut on shape, ask to know delay.
Not for napoleonic period, end XIXth Century?
-
Embroidered chinscales for officer's shako, price by pair.
Copy of different chinscales for officers from "Musée de l'Empéri"
-
Bocettes for chinscales, brass colour, made in India, price by pair
40 mm diametre.
Horn in brass not in stock.
-
Bocettes for chinscales: grenade, star, horn. The pair
Diametre: 3,7 cm for horns, 4 cm for grenades and stars.
Horn for chasseur, grenades for grenadiers or artillry
Star for hussars....
-
Lion head with hook for shakos and talpacks, price by one
Used to hold small chain passing under chin on shakos and talpack from Second Empire till beginning of first World War.
-
Lion head for shapska, with hook, price by pair
6 X 6 cm.
Front of one with ring, second one with hook.
2 pins on back
-
Crossed canons with bullets 35 x 35 mm. on stock
Gilded brass.
Now adapted with a brooch on back, you can use it as a jewel or just cut a part of the pin and adapt it to ammunition pouch, belt buckles, brass plate for hat...etc
-
Cord for officers: colbacks and shakos
For chasseurs only pompons and "raquettes", NO CORD (but there are exceptions) on colbacks.
For others a cord join right and left.
In silver or gold.
Thin fringes for lieutenant and captain, thick torsades (bullions) for chef d'escadron, colonel and general.
We can add stars for generals. (3 € each)
-
Cord for shapska
Made in silver cord, but can be also made in yellow or white
-
Police headgear ornaments horn
Hand embroidered police headgear Ornaments for Officers. A large choice of colours is possible. Height : 6 cm
-
Horns - Police headgear ornaments hand-embroidered - The unit
Police Headgear Ornaments: Height : 3 cm, width 5 cm
The bell can be on turned to the left or to the right.
-
Police headgear for officers, hand-embroidered grenades
Police Headgear Ornaments Height : 60 mm. flames: 35 mm large
-
Police headgear grenades ornaments for troopers, hand-embroidered
Police Headgear Ornaments for troopers.
Grenades in silk embroidery on Melton fabric.
A large choice of colours is possible. Height : 5 cm
-
Plume holder
3 cm high, 2 cm diametre inside in upper part. Gold or silver
-
Sacred heart of jesus
Favourite symbol of "chouans", it shows the tradition of peasants from Cholet region to traditionnal believings "God and the King". 85 mm high x 70mm large. Made in our atelier
-
Grenade for bearskin hat, "cul de singe"
Gold thread for officers, white thread for troop, embroidered on a red melton.
When not on stock, delivery time is maximum 6 weeks
-
Embroidered cockades for officers hats
Auction house Osenat proposed on 10th june 2012 vacation, a very nice confederatka, which belonged to major Jerzmanowski. We copied the embroidered cockade and suppressed polish cross inside of it. We propose it now in 2 sizes, one small for shakos (and confederatkas) and a bigger one for bicorns.
-
Revolution cockade for troop, for hat or Phrygian bonnet, NEW AND CHEAPER
Cockade with exact succession of colours as during revolution and beginning of Empire Size: 75 X 70 mm
17,00 €
Out of stock
-
Pompons and pompons carottes - per unit
Various shapes and colours
-
Pompons and pompons carottes
Various shapes and colours.
Pompom lenght 10 to 12cm for a total lenght of 18cm.
-
Pompons made in Asia- per unit
Some colours are possible.
CAUTION: quality, and price, are quite lower than for french productions, to leave on a shako in your living room it can be OK, but not for re enactment in extreme conditions.
Don't order any if you plan to use them in re enactments.
-
Pompons for officers, gold or silver.
Gold or silver torsade on wood. Made in our atelier
-
Gold pompon - One big ball with small fringes - The unit
For bonnet de police, shapska, colbacks, caps cordsa and sides of bicorns (lieutenant and captain).
Sold with or without cord.
Without cord, there is a hole in the middle to pass the cord or wire of your choice to fix it.
-
Silver pompon - One big ball with mall fringes - The unit
For bonnet de police, shapska, colbacks, caps cordsa and sides of bicorns (lieutenant and captain).
Sold with or without cord.
Without cord, there is a hole in the middle to pass the cord or wire of your choice to fix it.
-
Gold pompons, one big ball, big torsades. The unit
For bonnet de police, shapska, colbacks, caps cordsa and sides of bicorns (from commandant to marshall).
Sold with or without cord.
Without cord, there is a hole in the middle to pass the cord or wire of your choice to fix it.
-
Silver pompons - One big ball with big torsades - The unit
For bonnet de police, shapska, colbacks, caps cordsa and sides of bicorns(from commandant to marshall).
Sold with or without cord.
Without cord, there is a hole in the middle to pass the cord or wire of your choice to fix it.
We had a delivery with the bottom of the torsades unattached together "free torsades" in the options.
-
Pompons, different colours, for "bonnets de police"
6 cm length
For bonnet de police, colbacks, caps cords.
Hole in the middle to pass the cord.
-
Small balls gold pompom, unit
LENGTH 7 cm.
Hand made. No thread to attach it, small hole in the middle to pass thread.
For hussar boots," bonnet de police"...
-
Small balls pompon silver,with thread to attach it
LENGTH 7 cm.
Hand made.
For hussar boots," bonnet de police"...
-
Cockade for colbacks and bearskin hat - per unit
Total diametre of pompon: 6 cm. Diametre of embroidered dark marine part: 52 mm
Aurore/orange eagle for "grenadier à pied de la garde" and "chasseur à cheval de la garde".
Yellow for "chasseur à pied de la garde".63,00 €
Out of stock
-
Pompon cockade with gold or silver eagle
In gold for chasseur or grenadier, in silver for elite gendarme
79,00 €
Unavailable
-
Oak leaves braid, gold or silver, 25 mm and 38 mm
Made in France.
Used to maintain braid on hat or for swordknots for genrals, marshalls...in 25 mm.
38 mm large was used from middle of XIX th century for seams of trousers.
-
Braid for generals and field's marshall hat
Only gold.
8 cm braid used for generals and field's marshalls hats.
Made in France.
You need 4 metres for a hat (outside, but also inside of higher part!).
We receive this braid with extra thread that we have to take off with small scissors..it takes a lot of time and we don't have enough time to make all the nice uniforms that we would like to make.
So you you can choose to do it yourself, you will earn 10 € per m and help us to make more creations.
-
Torsades for officers hats, gold or silver. Price for one
Size 38 to 42 cm. Diametre 8 mm. Each one goes from cockade to button, turn around it and comes back to cockade.
Indicated price is for one torsade, cockade and button are just to show how to use it.
-
Pompons, different colours, for "bonnets de police" - price per unit
60 mm length including fringes 45 mm
For fatigue cap, colbacks, caps cords.
Cord to attach it included.
-
Austria, headgear plate
Made in Paris for austrian army of XIX th century (but does not fit first empire period).
Sold as they are.
20 X 14 cm
-
Brass thread
50 grammes, 18 cc, diam: 0,36 mm. Very useful to attach plates or restaure sabres or swords hilts
-
Gendarmerie royale, shako plate
Copper asbestos production, silverplated.
Interesting way to copy rare plates in short series.
Sold as it is, not perfect, but barely impossible to find as original.
12 x 12 cm
-
Tete pour coiffe
Tête en polystyrène pour
-
Square buckles - the pair
Worked bronze 4 X 4cm
-
Shako star to fix shako cord. gilded
Gilded brass, star size 3 cm
-
Staff officers ornaments for "bonnet de police", thunders, price per one
Winged thunders in gold thread on melton 40 mm