Javascript n'est pas activé !
Vous devez l'activer pour passer commande.
Brass napoleonic ornaments
It was important to recognize the rank and unit of every soldier and to remember that eagle was the symbol of Empire
-
Medusa head on brass circle 38 mm
Initially made for french army to make belts.
We bought remaining stock
-
Buckles with medusa face, stamped brass, old production made in France!
2 parts in stamped brass, diametre 50 mm, linked by a brass snake .
Price is for 3 pieces, of course.
Very nice french quality, quite different of actual asian productions. Not new but still in good condition
For width of belt 48 mm. Limited stock35,00 €
Out of stock
-
Plate for garde du corps du roi, brass.
Very nice and rare, but small fault inside brass looking like a M, discounted.
105 X 80 mm79,00 €
Out of stock
-
Silverplated ferrets, price for 10, very limited stock
Diametre 8 mm, length 40 mm.
2 small holes to sew them
-
Plate for belt of surgeon of imperial marine, first Empire
Made some years ago, only one on stock
Dim 63 mm X 84 mm120,00 €
Out of stock
-
Lot de 3 cuivreries argentées
Ces 3 pièces de cuivrerie argentées présentent des défauts de finition, nous les bradons.
Plaque de ceinturon de la gendarmerie Impériale.
Plaque de ceinturon de commissaire des guerres.
Plaque de baudrier, sans système de fixation, des douanes Impériales.
-
Gendarmerie Impériale 1st Empire. Officer belt buckle: silver on brass
Rare reproduction of brass plate for belt of gendarmerie Impériale.
Very uncommon
90 X 70 mm.
-
Plate for garde du corps du roi, restoration, sold without sword.
Very nice copy. 75 X 95 mm
-
Shako plate for Imperial custom.
Very rare plate
Nr 7 corresponds to Anvers.
Heigth 15 cm, large max 12 cm.
Silverplated.
-
Plate for officers with lillies, restoration - copy
Very nice copy. 105 X 85 mm
-
Army post, Révolution, baldric plate
70 X 58 mm.
Nice copy of revolution plate for baldrics for army postman.
-
Gare forestier de la ville de Paris, plaque de baudrier
Copy of a rare plate
95 X 72 mm
-
Buckle for "Commissaire des guerres".
Copper asbestos production, then silverplated.
Interesting way to copy rare plates in short series.
90 X 65 mm.
-
Buckle for "Inspecteur aux revues".
Copper asbestos production, then silverplated.
Interesting way to copy rare plates in short series.
90 X 65 mm.
Not perfect, sold as it is.
-
Surveillance sur les ports et rivières, baldric plate
70 x 90 mm.
Nice and rare plate
-
Light cavalry, lion head buckles, 5 plates set
Light cavalry belts during Empire period were sometimes as narrow as sabre straps.
We sell a set of 2 closing buckles with snake shape link ,and 3 plates to hold straps for sabre and sabretache.
For 25 mm width belt and straps.
Bronze
56,00 €
Unavailable
-
Rare plate for belt of cuirassier of the queen, Restoration.
Made some years ago, only one on stock
Dim 69 X 80 mm87,00 €
Out of stock
-
Gendarmerie Impériale 1er Empire. Plate for ammunition pouch
10 X 9 cm.
Only one original plate as this one is known!
-
General revolution. Belt buckle
Rare and very big buckle (120 X 90 mm) for Commissaires du peuple (silverplated) or general (goldplated..pale aspect).
-
Gendarmerie Impériale shako plate
Copper asbestos production, silverplated.
Interesting way to copy rare plates in short series.
Sold as it is, not perfect, but barely impossible to find as original.
12 x 12 cm
PRECEDENT PRICE: 92 €
-
Eaux et forêts, 1 er Empire. Plaque de baudrier
Très belle reproduction, aux ciselures de qualité, d'une rare plaque de baudrier des Eaux et Forêts.
Dim: cm X cm.
-
Silverplated belt plate for Italian royal guard
Napoleon was Emperor/Imperator (of France) et Rex/king (of Italy).
Italien guard was royal, colour is silver instead of gold for imperial guard and a crowned star appears on eagle chest..
83 X 63 mm. Silverplated brass.
-
Maitres postillons, armband plate
Corresponds to Fulda military post office between 1806 and 1808.
85 X 70 mm
-
Brass rings - Different diameters- Price by one
Bronze: limited stock.
Size 1 30/10
Outer diam: 26,80 mm
Inner Diam 20,75 mm
Thickness: 2,80 mm
Size 2 39/10
Outer diam: 29.30 mm
Inner Diam 21.20 mm
Thickness: 3,80 mm
Size 3
Outer diam: 33 mm
Inner Diam 26 mm
Thickness: 3,70 mm
Size 4
Outer diam: 50.50 mm
Inner Diam 40.80 mm
Thickness: 4.90 mm
-
Ornement aux foudres argentées
21 X 33,5 mm.
Belle production française.
Insigne aux 23 écalairs, pattes de fixation au dos
-
Buckles with medusa face, silver or goldplated, old production made in France!
2 parts in stamped brass, diametre 38 mm, linked by a brass snake .
Price is for 3 pieces, of course.
Very nice french quality, quite different of actual asian productions. Not new but still in good condition
For width of belt 38 mm. Limited stock
-
Buckle to close belts for health service officers
This type appeared during 3 rd republic and is still used for ceremonies.
Very nice goldplating sometimes slightly oxydized, limlited stock!
27,00 €
Out of stock
-
Stars in embroideries style, 2 colours: 18,5 mm
Nice stamped gilded or silverplated stars made some decades ago in France.
2 pins on back. To indicate rank of general on military accessories as epaulettes, sash, cuffs...Etc.
But also to evocate a starry sky....Be creative.
Discounted price till end of stock
-
Stars in embroideries style, 2 colours: 18,5 mm - copie - copie
Nice stamped gilded or silverplated stars made some decades ago in France.
2 pins on back. To indicate rank of general on military accessories as epaulettes, sash, cuffs...Etc.
But also to evocate a starry sky....Be creative.
Discounted price till end of stock
-
Stars in embroideries style, 2 colours: 18,5 mm - copie - copie - copie
Nice stamped gilded or silverplated stars made some decades ago in France.
2 pins on back. To indicate rank of general on military accessories as epaulettes, sash, cuffs...Etc.
But also to evocate a starry sky....Be creative.
Discounted price till end of stock
-
Buckle to close belts for marine officer, in a single piece
Very nice gilding. Very limited stock. 50 X 40 mm.
For ceremonial belts of french marine
-
Old buttons 27 mm striped, brown
Nice (vrey) old buttons very nice to put on period end ofLouis XVI/revolution.
Very limited stock. We took them from an old jacket.
-
Boucleton pour bélière de sabre d'officier de marine
Très beau passant de bélière utilisé pour les ceinturons de cérémonie d'officiers de la marine française.
30 x 30 mm, belle dorure, très décoratif.
Prix sans commune mesure avec le cout de production.
-
Clasp for cloak of marine officer
38 mm high, nice production, made in France, limited stock.
27,00 €
Out of stock
-
Buckle with sabre, made with 2 plates and a link with snake shape - copie
Goldplated, limited stock. Made in France some decades ago.
Diametre: 38 mm
Total length: 2 plates + snake: 125 mm
-
Buckle with sword, made with 2 plates and a link with snake shape
Goldplated, limited stock. Made in France some decades ago.
Diametre: 40 mm
Total length: 2 plates + snake: 130 mm16,00 €
Out of stock
-
Brass grenade 70 x 45
Brass grenade, still used in "garde republicaine".
Grenades can be attached by 2 points for gold and silver colour.
Nothing to fix them in red type.
Very limited stock!
-
Belt buckle with grenade for cadets - second choice
54 x 58 mm.
Surface is not absolutely perfect. It's a pity because these buckles are new and goldplated...
Limited stock. Made for cadets of ESM (Ecole Speciale Militaire).15,00 €
Out of stock
-
Buckles for officer's straps for sabres -" flowers"
Brass. 55 X 30 mm.
Width for strap 20 mm.
-
French musket sling buckle
Bronze, REGULATION TYPE
-
Mousqueton for mousquet 16 x 10 cm
Steel buckle used to attached the "mousquet" on the back of the rider. It allows to pass promptly the rifle from back to front.
-
Bronze grenade, 9 peaks in flames
Brass grenade
Height: 5 cm
-
Aiguillettes, top lacking
Top is lacking
Unusable to make "normal"aiguiets, can adorn some cords or laces
Limited stock. Total length 65 mm.
-
3 buckles for staff officers, copies
Extremely rare, sold together
-
Bear hat brass plate, imperial guard
PRECEDENT PRICE: 47 €
Regulation type.
Nice in a collection! Most famous symbol of "grognards", the infantry of imperial guard.
Stamped brass 21 X 16 cm.
-
Shako plate for marin de la garde - The unit
Plate described in book of C Blondiau(Aigles et shakos du premier Empire, Hors série No 4 d'Uniformes, Les armées de l'histoire), page 34. Size 10,5 X 9 cm. Brass. Exclusive production for Antikcostume.
-
Buckle for general belt
Delivery expected for an improved type in march.
-
Buckle for "ingenieur geographe"
Ingénieurs géographes had to make maps of all Europe to prepare battles.
-
Belt buckle for guard infantry
Bronze buckle, dimensions 8.5 X 5 cm .
Delivered with the complete fastening.
Detailed description in "Pétard"sur les équipements miltaires , figure 490.
Delivery expected for an improved type in march.
-
Buckle for husar
Brass buckle made in 2 parts ( 60X18 mm) connected by a "S"piece ended by birds heads .
-
Buckle for husar
Brass buckle made in 2 parts ( 60X18 mm) connected by a "S" piece with snake shape .
-
Buckle for artillery
Each brass plate is 45 mm( diam)
-
Lion heads buckles, on stock
Classical type, fits to all officers, brass.
29,00 €
Unavailable
-
Buckle with medusa face, Asian production
2 parts in brass, diametre 51 X 51 mm, linked by a brass snake . Price is for 3 pieces, of course.
Medusa could petrify his ennemies, just looking at them, it is why she is represented on buckles, tell me if it works?
-
Gendarmerie imperiale, front of buckle
Nice stamped brass, very decorative, 72 mm X 64 mm.
PRECEDENT PRICE 21 €
-
Gendarmerie royale, shako plate
Copper asbestos production, silverplated.
Interesting way to copy rare plates in short series.
Sold as it is, not perfect, but barely impossible to find as original.
12 x 12 cm
-
Plates for officer, with 8, 1810 regulation type, dull aspect
12 X 12 cm, stamped brass.
We receive them with a dull aspect, after cleaning it has a shiny brass aspect.32,00 €
Out of stock
-
Plaque de l'artillerie de marine
Grosse plaque en laiton à détourer, vendue en l'état, taille du motif 90 X 70 mm.
12,00 €
Out of stock
-
Small eagle for ammunition pouch, brass
Small brass eagle 3.5 x 3.5cm. Empire-Napoleonic period.
Made in France.
You can easily take off ring.
-
-
Grenade without fixing - The unit
45 X 35 mm, quite good for 4 corners of ammunition pouch for infantry of imperial guard.
No fastening system on the back.
2 sizes:
Height 45 X 35 mm in pickled brass
Height 70 X 45 mm in 2 versions brass or red copper.
-
Small eagle in brass 10 x 10 mm
Made in brass from old dyes. Very nice to add around frames, on books covers....etc.
No pin on back, colour can be slightly red or purely like natural brass. Made in France.
Price for one
-
Samm eagle in brass 19x 20 mm
Made in brass from old dyes. Very nice to add around frames, on books covers....etc.
No pin on back, colour can be slightly red or purely like natural brass. Made in France3,80 €
Unavailable
-
Brass granate 105 mm high, for ammunition pouch
Big brass granate with 2 fixations on back for line infantry ammunition pouch
10.5 cm high, maximum width 75 mm.
-
grenade estampée avec fixation 45 X 38 mm- L'unité
Grenade nickelées avec 2 pattes de fixations
Hauteur 45 mm, largeur maximum des flammes 38 mm et diamètre de la base 20 mm.
-
Small brass grenade: 25 x 15 mm
No fixation on back
-
Grenade en bronze 32 x 38 mm
Petite grenade bronze avec 2 fixations au dos.
-
Brass grenade, 41 x 31 mm, for old guard infantry ammunition pouches
Fastening on the back.
To put by 4 on sides of ammunition pouch flap around eagle6,50 €
Unavailable
-
Brass grenade, 55 mm
Fastening on the back
-
Lion heads in brass, new type
New types in stamped brass
-
Lion head, stamped brass
For straps and sides of ammunition pouches
2 possible sizes
30 mm X 33 mm
22 mm X 25 mm
-
Horn for light infantry ammunition pouch, brass, on stock
Brass: 7,2 X 4,2 cm
-
Horn in goldplated brass 40 x 22 mm
2 pins on back to fix it
-
Horn and grenade, small size
Not for french army, size 39 X 32 mm. 5 different colours. Very small stock
-
Crossed axes for "sapeur", on stock
Brass: 7,5 X 7,5 cm
-
Buckles for officer's straps for sabres, lions
Brass. 55 X 32 mm.
Width for belt 26 mm
-
Austria, headgear plate
Made in Paris for austrian army of XIX th century (but does not fit first empire period).
Sold as they are.
20 X 14 cm
-
Boucle a rouleau laiton
Passage intérieur 25 mm, tout laiton
-
Buckles for jackets and trousers
Available with 3 options : steel, bronze or black (28 X 20 mm) .
Usable width : 24 mm
-
Lion head with hook for shakos and talpacks, price by one
Used to hold small chain passing under chin on shakos and talpack from Second Empire till beginning of first World War.
-
Brass plate for dragoons and grenadiers a cheval of the guard (from 1805)
12 X 9 cm, bronze.
Very limited stock
-
Belt for admiral or "contre" or "vice" amiral
Copy of a genuine belt from musée de l'Empéri, pages 194/195 of book "Les trésors de l'Empéri".
Embroideries on dark marine leather.
You can choose sword or sabre hanger.
-
Buckle for straps of sabre and sabretache: light cavalry troop
As indicated , inside 22 large
-
Eagle, young guard. Head looking to right
Stamped brass eagle. Dimensions 10,5 X 8 cm.
Suitable for sabretache of "chasseur a cheval de la garde", ammunition pouch and shako of young guard.
MADE IN ASIA.
-
Plates for troop with 8, 1810 regulation type.
12 X 12 cm, stamped brass
35,00 €
Out of stock
-
Bronze buckle 80 x 65 mm
Big size: 80 X 65 mm.
-
Lion head with hook for ammunition pouch
Bronze: 45 X 50 mm.
2 clips on back
-
Buckle, brass: 9,3 x 5 cm
Big size: 93 X 50 cm (taille extérieure). Bed width 80mm